Depending on the design, most underfloor heating pipes are laid at 200mm. The limit for heat output of any underfloor heating system is 70 W/m2 for timbre suspended floors and 100 W/m2 for concrete floors. If an underfloor heating system is to function effectively, the building must be constructed according to the latest building regulations. No room must use more than the stated output capacity. At Clifton Hill & Montpelier Underfloor Heating Brighton and Hove, working along accepted regulations is a priority for our engineers. Compliance not only guarantees customer safety, but provides maximum efficiency and cost reduction.
As part of our commitment to giving the best customer experience, Clifton Hill & Montpelier Underfloor Heating Brighton offers a free home call out service. This involves an inspection and consultation to provide sufficient information for customers to make savvy decisions. Are you self-installing? DIYs tasks are good, but how knowledgeable or equipped are you? Pipe layouts, designs and installations are a lot more complicated than you think. We also respond to emergency calls regarding underfloor heating services in Brighton and Hove. Furthermore, our prices are fixed, so customers need not worry about hidden costs.
When installing an underfloor heating panel into a single room, we lay it out in 2 equal loops. This means when you switch on the underfloor heating, the 2 loops warm up synchronously. The loops do not need to be exactly equal in length. We simply lay the first loop in one half of the room, and the second loop in the other half of the room. Finally, we lay 3 or 4 runs of fixing rail based on the length of the room. We clip it every 1m or 1.5m.
This pipe layout is similar to the first, but instead of 2 loops in the room, it requires 1 loop. We lay the fixing rail so there are 3 or 4 runs depending on the room length. Our engineers lay the fixing rail about 500mm off the wall where the pipework enters the room and 300mm on the opposite end.
The rails are fit into place with insulation clips. We then lay the underfloor heating pipe into the fixing rail and use the clips to hold the pipe between the rails and at the ends.
Whenever we install underfloor heating in 2 rooms (about 20 Sqm each), our installers lay 1 loop (max length 120m) in each room. The temperature in the rooms will be regulated by 2 thermostats and actuators- that is 1 thermostat per room. As in the single area, 3 or 4 runs of fixing rail are laid according to the room length. Then each run is clipped every 1m – 1.5m. When fitting underfloor heating on the ground floor, we place the manifold in a central position to prevent running the pipe-works through rooms that don’t need the heating. The temperature of each room on the ground floor will be regulated with a thermostat, while smaller rooms can be regulated with another room. For instance, the kitchen and utility, the hallway and dining room.
Laying a pipe requires some skill and lots of knowledge. To ensure you get it right, it is ideal to hire an expert or work with one.
At Clifton Hill & Montpelier Underfloor Heating Brighton, we provide obligation-free counselling for customers who are at the pipe-layout stage of setting up their own underfloor heating systems. Our advice and tips are jargon-free. Call us today
Our engineers work with the wellbeing of your family in mind at all times. They are highly experienced and trained to take full precautionary measures. Clifton Hill & Montpelier Underfloor Heating Brighton also avoids health issues by conducting a thorough analysis report pre-project commencement.
All works are covered by an insurance policy.
As an independent company, we are in complete control of the quality we deliver and the procedures we undertake. This guarantees that customers are given the best service from professionals who are 100% dedicated to their duties.
Our passion for excellence makes our business highly sought for underfloor heating solutions in Brighton and Hove.
It is difficult to carry out a full pipe-layout without the right materials. At Clifton Hill & Montpelier Underfloor Heating Brighton we work with manufacturers who produce the strongest pipes and use modern techniques to set up quality heating in your home.
Our equipment also provides quick convenient solutions to heating problems.
Our first-time customers are quick to retain our services after the first project. Clifton Hill & Montpelier Underfloor Heating Brighton, is always ready to provide quick, hassle-free solutions to underfloor heating systems.
Whether you are a homeowner, builder, installer or utilities company, we offer free quotation upon request. Call us today for a copy 01273 257122 .